Using Reverse Gear On Hobby 500 Br; Adjusting The Support Wheel; Depth Skid; Cleaning After Use - Texas Hobby 500 B Manual De Instrucciones

Do not cultivate in very wet soil as clods of soil will be formed, and these are difficult to
break. Dry and hard soil may need to be cultivated twice.
Note: The gear can become very hot during operation

Using reverse gear on hobby 500 BR

The Hobby 500 BR is fitted with a reverse gear. To operate, press the left handle down.
Never hold the right and left handles down at the same time! This can damage the
machine.
Keep legs clear when reversing.

Adjusting the support wheel

It is necassary to adjust the height of the supportwheels, when cultivating.
Use the pedal(a) on the right for the supportwheels, to release. There are 3 settings.
Figur 15.

Depth skid

The setting of the depth skid determines the working depth. The deeper the rod is set, the
deeper the machine will till the earth. The correct blade depth is the "key" to easy
cultivation. The setting varies according to soil conditions.

Cleaning after use

The cultivator should be cleaned after use. Use the garden hose to wash the earth and dirt
off. Remove quick grass, etc., from the blade shaft. The chassis identification number
should only be wiped over with a damp cloth, otherwise it could get damaged. Avoid using
a high-pressure cleaner.

Engine

The engine is delivered without oil and fuel. Remember to fill the engine with engine oil
before starting.
Follow the guidelines in the user manual for correct use and maintenance of the engine.
13