Sleep Timer; Care And Maintenance - Roadstar CLR-2466N Manual De Instrucciones

Ocultar thumbs Ver también para CLR-2466N:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
ALARM OFF: During Alarm on, press [POWER] button (2) to deactivate the alarm
sound (the Alarm setting remains) or press [SNOOZE] button (1) to postpone the
alarm for 9 min. To activate or deactivate the alarm, in stand-by mode, press the
[ALARM 1 or 2] (5/6) button (When the alarm is ON, the " " indicator will light up
on the right or left side of the display).
TO USE THE RADIO
1.
Press the [POWER] button (2) to power ON the unit;
2.
Adjust radio frequency to your desired station by pressing the [TUNING +/-] but-
tons (3/4). (If you hold tuning button it will scan until it finds the next station);
3.
Adjust the volume with the [VOLUME +/-] (5/6);
4.
To switch off the radio, press the [POWER] button (2).
Note: For a better reception reorient the antenna.
PRESETS
1.
Tune the desired station as explained above;
2.
Press and hold [SET] button (9) until "P" will flash;
3.
Press the [TUNING +/-] buttons (3/4) to choose the number;
4.
Press the [SET] button (9) to save the radio station.
RECALL A PRESET STATION:
Press the [SET] button (9) and then choose the number of the preset by pressing the
[TUNING +/-] buttons (3/4).

SLEEP TIMER

The sleep timer switches the radio off automatically after an adjustable time. When
the radio is ON:
1.
Press [SLEEP] button (1) repeatedly to adjust the sleep shutdown time. You can
choose between 120-90-60-45-30-15-OFF;
2.
Sleep time will be confirmed if no button is pressed within 5 seconds.
CANCEL SLEEP TIMER
Press [SLEEP] button (1) repeatedly to select "OFF".

CARE AND MAINTENANCE

To prevent fire or shock hazard, do not allow this clock radio to be exposed to rain or
moisture.
This clock radio should not be exposed to direct sunlight, very high or low tempera-
ture, moisture, vibration, or placed in a dusty environment.
Do not use abrasives, benzine, thinners, or other solvents to clean the surfaces of the
clock radio. To clean it, wipe with a mild non-abrasive defergent solution on a clean
soft cloth.
Never attempt to insert wires, pins, or other objects into the venlilation holes or ope-
nings on the clock radio.
Note: When setting the Clock or Alarm times remember that this clock radio
has a 24 Hour clock mode.
English
2

Publicidad

Tabla de contenido
loading

Tabla de contenido