Air Filter - Mouvex B200 Manual De Instrucciones

Quick Start Guide | SCREW COMPRESSORS – B200
EN
Using of the kit delivered by MOUVEX Integrating the metallic
o
1
gasket, the 4 Nord Lock washers and the 4 nuts.
o
Nuts tightened to 37 Nm.
2
o
3 Dripstone turned down.
o
Screws tightened at 13 Nm.
4

Air Filter

1
o
• Rain cap in place.
o
Clogging indicator visible.
•
o
• Cartridge in place and clean.
Hose (supplied with the compressor) :
2
o
• 1. Hose adjusted to the installation. Clean inside.
o
2. & 3. Nipples in place on the hose.
•
o
• 4. Heat shrinkable sleeves in place.
o
• 5. & 6. Clamps in place and tightened.
o
1 The graphite flange gasket MOUVEX (REF 228065) is in place.
o
Screws tightened at 44 Nm.
2
o
3 A 90° elbow is fitted on the flange.
o
PF version: the discharge hose delivered is fitted on that elbow. If arrow presence, turn the hose in the good direction.
4
o
5 Other versions (PS et HY): the piping fitted on the elbow has a downward slope.
o
All the connections must be welded.
6
o
7 Silencer (option)
o
Rigid pipe Ø 1" ½
8
o
9 Check Relief valve MOUVEX
o
10 There is a plug at the end of the pipe.
o
11 The waterproofness of the whole piping has to be checked.
2
CONTROL CHECK LIST
Installation Of The Compressor B200 Flow control
A. Fixation of the compressor B200 version PF
B. Suction
B. Discharge
5 3 4 1 4 2 6