Orangemarine INOVANEX LC air 200 Manual De Usuario página 19

WARNING! Never use high compression pumps for inflating your boat, overpressure
could damage the seams.
b. Floorboards assembling for SLATTED DECK TENDER 270/290/320:
1. Push the floorboard (1) into the bow.
2. Push the floorboard (4) into the transom.
3. Push the floorboard (2) into the floorboard (1).
4. Push the floorboard (3) between the floorboards (2) and (4).
Push until the boards are securely in place.
Assembling of the side joiners for SLATTED DECK TENDER 270/290/320:
NOTE: during the assembling of floorboards, the identification numbers must be turned
upward.
2.2 Disassembling
1. For deflating the boat, unscrew all the valve caps.
2. Disassemble the seat.
3. Disassemble the side joiners of the floor.
4. Lift up the floorboards and separate them from the H channels.
5. Remove the floorboards. Remove bow and transom boards at last.