Rear Panel - Audio Pro Living LV22 Manual Del Propietário

ENGLISH
SPECIFICATIONS
Type:
Powered wireless loudspeaker system
with DSP, 2-way bass reflex cabinet
Amplifier:
2 x 25W digital Class D,
left and right speaker
Tweeter: 1" soft dome
Woofer: 4.5" paper cone
Frequency range:
45 – 22.000 Hz
Crossover frequency:
2700 Hz (24 dB/octave L/R)
Dimensions HxWxD mm:
213x148x205
Power consumption:
On: 3.4W to 60W max (each speaker)
Standby: 0.3W (each speaker)
OVERVIEW

REAR PANEL

House Code button Zone/Pair button Main power
To 230V AC outlet
4
FEATURES
- Built-in wireless receiver in each speaker
- Wireless full CD quality sound
- Wireless range room to room: Up to 20 m
- Wireless range in same room: Up to 50 m
- Wireless rangein open area: Up to 100 m
- No interference or delays
- Works with both Mac and PC
- RF band: 2.4GHz
- Sample rate: 48 kHz
- Dedicated proprietary protocol
REMOTE
On/Off
Master volume
Shows selected
House Code in
display. 1, 2, 3
SOURCE
Source.
(Only used
in combination
with LV-HUB.)
NOTE:
To use remote, aim at IR-eye on RIGHT speaker.
(Only RIGHT speaker can receive remote commands.)
OVERVIEW continued
TXD200 TRANSMITTER
1. House Code selector.
Choose channel for the transmitter.
Mute
2. LED.
Blue indicates connection.
Red indicates no connection.
Green indicates paired connection.
Zone volume
3. Pairing button. Press this on the transmitter and
on the speaker(s) to pair.
Shows selected
4. USB in. For connecting to a computer.
zone in display.
Or to connect a power supply when using an audio
A, B, C
source connected to line in.
5. Line in. Combined optical and analogue. For
connecting the transmitter to an audio device other
than a computer.
IR receiver for remote
Display
LED status indicator:
- Steady blue indicates wireless connection established.
- Flashing blue indicates wireless connection lost.
- Red indicates no wireless connection or no transmission.
- Green indicates a paired connection.
Display:
The displays shows: volume level, chosen channel (House
Code), chosen zone and mute (–). The display shows the
information for 3 seconds after an adjustment.
The House Code selection and Zone selection buttons are
located on the rear of the LV22 speakers.
1. House Code, press once to display the chosen channel (1, 2, 3).
Further presses change the channel 1>2>3 and back to 1.
2. Zone, press once to display the chosen volume zone (A, B, C).
Further presses change the zone A>B>C and back to A.
4
5
1
2
3
5