CIAT MAJOR LINE Manual De Instrucciones página 28

For your safety, wear protective gloves!
may cause damage to the frame or the body of the unit and adversely affect its
main functions and its appearance.
When installing the unit, the casing must be removed and replaced in its original
packaging, to protect it from any risk of scratching.
The protective electrostatic casing film must always be removed before the
lower section towards you and lift the casing.
towards you and lift the casing.
If the unit is equipped with a control with flush-mounted terminal, remember to
disconnect the quick-release connector, accessible on the side on top of the
- Return the casing to an upright position so that the brackets on the frame clip into
The unit should be lifted by its mounting holes. It is possible to carry out the
installation using a fork-lift truck, as long as care is taken not to damage the unit.
N 09.60 F
EN - 2