Cleaning Procedure; Technical Data - Stylies ELARA Instrucciones De Uso

5. Select the power supply. There are three options avail-
able:
1. Connecting the network adapter (11) and USB ca-
ble (10) directly to the power supply (100 - 240 V)
2. Connecting the USB cable (10) to a USB connector
with a charging function (12)
3. Using 2 standard batteries (14) of size AA/LR6/
Mignon
6. The device is operated by repeated pressing of button
(2). The display (1) shows the selected state of opera-
tion using LEDs:
– LOW: gentle, consistent fragrancing (the emission
operates at maximum level for a few seconds and
then switches to a gentle consistent fragrancing).
– HIGH: maximum consistent fragrancing. This setting
is recommended if a larger space needs to be quick-
ly fragranced.
– INTERVAL: Minimal operation for 10 minutes. Then
the device switches off for 20 minutes. Advantage:
you will get less used to the scent with this setting.
This mode also significantly increases the operating
time when using battery power.
– TIMER: The device switches off after approx. 2
hours.
– If no LED is illuminated, the device is switched off (or
the battery could be flat if using battery operation).
7. If you want to change the scent, switch off the device
and insert a different Stylies aromatherapy gel tin. Re-
seal the previously inserted tin. Then switch the device
back on again.
8. The fragrance distribution is dependent on several
factors and can vary significantly. The intensity of the
scent is influenced by one's own personal sense of
smell (each person perceives scents and their intensi-
ty differently). The intensity is dependent on room tem-
perature and humidity as well as the size of the room
16
Elara-UserGuide--DH 07.indd 16-17
and air circulation in the room. The intensity is higher
when the doors and windows are closed.
For information: when selecting a function, Elara in-
9.
creases the blower output in order to switch to the se-
lected function.

CLEANING PROCEDURE

Switch off the device and unplug the power Adaptor from
•
the socket before all maintenance work and after each
use.
Never submerge the device in water (this can result in
•
short-circuiting/ electric shock). To clean the device, sim-
ply wipe it with a damp cloth and then dry it thoroughly.

TECHNICAL DATA

Dimensions
Net weight
Voltage
Power consumption:
Fulfils EU regulations
Subject to technical changes and errors without notice.
74 x 74 x 100 mm
(Length x Width x Height)
ca. 190 g
DC 5 V
1.4 W
CE/WEEE/RoHS
17.11.16 15:31
17