wilux ELITE Manual De Instrucciones página 14

Istruzioni Elite 24-05-2004 10:14 Pagina 14
• The siliconated parts have to dry at least 24 hours before using the steam shower.
• The installation must be carried out by a nationally recognized technician, which has to
take into account the regulations in force conforming to C.E.I. EN 60335-1 and C.E.I. EN
60335-2-60.
• The main cable must be permanently connected to a water resistant connection box.
• The electricity supply, 230 V.A.C. – single phase -, must be connected by a double
contact circuit breaker (30mA) to the earth wire a minimum contact opening of 4mm.
• Should the main cable be damaged, it must be replaced with an original one, available
from the Service Assistance Wilux, phoning ++31 348 46 20 30, faxing ++31 348 43 00
88 or mailing to wilux@wilux.nl.
• The steam shower must be installed in such a way that the electrical components cannot
be touched using it.
14