Peg-Perego kit auto Instrucciones De Uso página 14

WARNING
IMPORTANT: Read these instructions carefully and
store them in the holder provided throughout the
lifecycle of the product. The child's safety could be put
at risk if these instructions are not followed.
• It could be dangerous to leave your child unattended.
• Assembly and preparation of the item must be carried out
by adults.
• Do not use the product if there are missing or broken parts.
• Before use make sure that all of the attachment
mechanisms are connected properly.
• Do not insert fingers into the mechanisms.
• Do not use near heat sources, open flames or dangerous
objects that are within reach of the child.
• It could be dangerous to use accessories which are not
approved by the manufacturer.
• Make sure the belts fastening the Car bassinet unit to the
vehicle are always taut and adjust the straps securing the
child.
• Never twist the belts.
• Replace the item if it undergoes significant strain in an
accident or shows clear signs of breakage or deformation.
• The safety device should not be modified by users in any
circumstances.
• Carefully follow the instructions supplied by the
manufacturer of the child restraint system.
• Never leave the child unattended in the Car bassinet unit
in a vehicle.
• The Car bassinet unit must always be secured with the
vehicle's safety belts, even when the child is not present. In
the event of sudden braking, it could injure the occupants
of the vehicle.
• When travelling in vehicles, never hold the child in your
arms and never put him/her anywhere but in the Car
bassinet unit. In the event of sudden braking, even at low
speeds, the child would be flung forward.
• Take particular care to make sure that luggage or other
objects are not located where they may injure the child in
the Car bassinet unit in the event of an accident.
• Do not leave the Car bassinet unit in vehicles exposed to
the sun. Some parts might heat up and be harmful to the
delicate skin of the child – check before placing the child in
the seat.
• Make sure that the Car bassinet unit is not obstructed by
any moving parts of the vehicle's seat or by one of the
doors.
• Do not use the Car bassinet unit without its fabric covering,
which cannot be replaced with one not approved by the
manufacturer since it is an integral part of the Car bassinet
unit and the safety system. If replacing it, use an official
spare part.
• The design of the Car bassinet unit features a polystyrene
shock absorption device built directly into the shell, below
the padding: do not remove it.
• This product is only suitable for children who are unable to
sit up by themselves.
• This product is designed for children from birth up to a
weight of 9 kg. When used in vehicles it is designed for
weights of up to 10 kg.
• Only use the product on surfaces that are hard, horizontal
and dry.
• Do not leave other children playing unattended near the
carriage.
• Take care when adjusting the mechanisms (handle,
backrest) with the child present.
• Regularly check the handle (or the handles) and the
bottom of the carriage to make sure that there are no signs
of breakage or damage.
• When using the carriage with a stand, check the maximum
length of the carriage specified on the stand.
instructions for use
Car Kit
how to fit the safety harness
Car kit for the models: Navetta XL and Primonido Evolution.
1• Position the car bassinet unit with the backrest and hood
lowered and the handle raised, if present.
2• When travelling in vehicles, remove any additional mattress
pads.
3• 3-POINT SAFETY HARNESS: Pass the leg divider straps
14