Publicidad
58
3.Press and hold the "Volume+" and "Channel+" buttons at the same time until
the indicator is switched on. Then release both buttons (the indicator light will
switch off and then on again).
4.Enter the 4-digit code. For example: the first set of codes for a PHILIPS TV set
is 1492. Enter 1492.
Note:
I.The code entered is correct. The indicator light will flash twice before
switching off.
II.The code entered is incorrect. The indicator light will flash three times.
Please re-enter the code.
III.To exit the setting function, press the "Select Equipment Button". For
example: Press the TV button if the previous setting is TV.
5.After entering in the code, the indicator light will switch off.
6.Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 6
until you have found the right code.
B.How to Search for Codes Automatically
1.Switch on the home appliance you wish to control. Place the remote control
directly at the home appliance, for example your TV.
2.Press and hold the "TV" button; the indicator light will light up.
3.Press and hold the "Volume+" and "Channel+" buttons at the same time until
the indicator light lights up. Then release both buttons (the indicator light will
switch off and then on again).
4.Press and hold the "POWER" button until the TV set is switched off. Release
the "POWER" button immediately.
5.Check if the other buttons operate correctly. If this is the case, the setting was
successful. If the buttons do not function correctly, please repeat steps 2 to 5
until you have found the right code.
Setting Favourite Channel
Use this function to set your favourite channels in "Favourite Channel".
Setting Method:
1.Press the "TV" button and select the equipment you want to set.
Press and hold the "Volume+" and "Channel+" buttons at the same time until
the indicator is switched on. Then release both buttons (the indicator light will
switch off and then on again).
Enter code 9993 manually. The indicator light lights up to indicate that the FAV
setting is in start-up mode.
2.Enter the channel number of your favourite channel. Press the "Power" button
to enter one channel number. Then enter the next channel number. Press the
"TV" button after you have entered all the favourite channels. The indicator
light switches off. The setting is completed. (The memory space is full when
the indicator light flashes 5 times. No channel number can be entered
anymore).
For example: Under the TV page you wish to enter channels (02), (38) and (56)
as your favourite channels. Enter the code 9993 manually before entering the
channel number one by one.
02
POWER
38
POWER
When the indicator light is switched off, the settings are completed.
3.In normal mode, press the "FAV" button with the remote control pointing at the
TV set. You can find your favourite channel in the order of settings. Press the
"FAV" button and your next favourite channel in the setting list will appear.
Clear Favourite Channel
Setting Method:
1.When setting the "FAV" channel, you can press the "FAV" button to clear the
wrong channel entered or re-set the settings. Press the "FAV" button once to
clear an undesired channel (one-button command). When a "Favourite
Channel" is cleared, the indicator light will flash three times.
2.To clear all favourite channels: Under the "Favourite channel" setting mode,
press and release the "FAV" button until the indicator light flashes three times.
This indicates that the information in the setting is completely cleared. Press
the TV button to exit.
Multi-Function Button Setting
There are two multi-function buttons on the remote control:
M1 and M2. Each multi-function button can store data for 20
buttons. You can use this function to combine the functions
of a series of different buttons or commonly pressed buttons
into one single button. After the setting has been completed,
press the multi-function button that was
56
TV
3
Publicidad
