Product Description - Gaymar Medi-Temp II FW400 Manual Del Operador

2.0

Product Description

The Medi-Temp II FW400 Series Blood/Fluid Warmer is a
simple, dry heat device designed for safe and rapid in-line
warming of blood, blood products, and other fluids through
the utilization of disposable Blood/Fluid Warming Sets.
The Warmer does not provide fluid flow rate control. Blood,
blood products, and other fluids at temperatures 10ºC and
below will be warmed to temperatures between 36°C and
43°C at flow rates of 10 to 300 ml/min. Room temperature
fluids (20°C) can be warmed at flow rates up to 500 ml/min.
The disposable Blood/Fluid Warming Sets are available in
Standard, Standard with Extensions, Pediatric, and High Flow
models.
A
2
F
G
B
C
Figure 1—Medi-Temp II FW400 Series Blood/Fluid Warmer
FW400 Series Blood/Fluid Warmer
2.1 Warmer (see figure 1)
The Medi-Temp II FW400 Series Blood/Fluid Warmer is a
sealed, fluid-resistant device. A lighted on/off circuit breaker
is located on the side panel. An LED temperature display is
located on the front panel. Fluid temperature is indicated in
degrees Celsius on the display. Also located on the front of
the unit is a slot for insertion of the Blood/Fluid Warming
Set's flexible cassette. On the side of the unit is a holder for
the bubble trap.
The Blood/Fluid Warmer can be placed in an X-Ray cassette
slot within an operating room table or on horizontal surfaces.
An integral pole clamp also allows the unit to be pole
mounted.
H
D
operator's manual
E