Gaymar Medi-Temp II FW400 Manual Del Operador página 5

operator's manual
FW400 Series Blood/Fluid Warmer
2.2 Disposable Warming Sets
(see figure 2)
The Medi-Temp II FW400 Series Blood/Fluid Warmer is
designed to be used with Gaymar D25000 Series Blood/Fluid
Warming Sets only. The following Blood/Fluid Warming Sets
are available for use at this time. Check with your local dealer
for more details.
Each Warming Set consists of a flexible cassette (for
insertion into the warmer) and a bubble trap with a manual
air eliminator. They are designed for use below 300 mm
Hg pressure with hospital standard intravenous (IV)
administration sets and venipuncture sets utilizing luer type
connectors. Each Warming Set also has input and output
pinch clamps. See figure 2.
The Standard Warming Set is designed for use at 300 ml/
min or lower flow rates. The Standard Warming Set with
Extensions provides the user with added patient lead length.
The priming volume of the Standard Warming Set is 39
ml. The priming volume of the Standard Warming Set with
Extensions is 48 ml.
The Pediatric Warming Set has a lower priming volume of
30 ml. Its patient connection lead utilizes thicker walled
tubing to provide added insulation at the lower pediatric
warming flow rates.
The High Flow Warming Set uses leads having a larger inner
diameter. This reduces restriction during circumstances
requiring rapid infusion. The priming volume of the High Flow
Warming Set is 79 ml.
G
D
F
Figure 2—Medi-Temp II FW400 Series Blood/Fluid Warmer—
Standard Warming Set
A
B
C
D
E
3