Mounting Instructions - Bosch ARD-AYK12 Manual De Instalación

ARD-AYK12
Installation Manual
The ARD-AYK12 is a RFID proximity card reader to be installed
for use with access control systems.
This installation manual contains the following information:
-

Mounting Instructions

- Wiring Instructions
- Operation Instructions
- Technical Specifications
MOUNTING INSTRUCTIONS
1 = To remove the top cover you need to unscrew the top
2 = Remove the top cover to reveal the screw holes for
Mount the reader with the appropriate screws (not supplied) as
indicated on the template.
To mount the reader, perform the following:
1. Determine an appropriate mounting position for the
reader.
2. Peel off the back of the self-stick mounting label template
included with the unit and place at the desired mounting
position. If you do not have the self-stick mounting
Bosch Sicherheitssyteme GmbH
cover screw located on the bottom of the reader.
mounting.
Installation Manual | en
| V 1.2 | 2009.09
5