Cleaning, Care & Maintenance; Technical Specifications - Polar Refrigeration CP728 Manual De Instrucciones

Cleaning, Care & Maintenance
Take out all food in the cabinets and disconnect the appliance from the electricity.
•
• Wait until the traces of ice on the evaporator have melted, then wipe inside to remove any water.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with warm soapy water.
• Always wipe dry after cleaning.
Troubleshooting
If your POLAR appliance develops a fault, please check the following table before making a call to the
Helpline or your POLAR dealer.
Fault
The appliance is not
working
Poor refrigeration
performance
Showcase is noisy
when turned on
Error code EE4

Technical Specifications

Model Voltage
CP728 220-240V
50Hz
CP728_ML_A5_v3_20190730.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
High ambient temperature
Poor ventilation
Door seals not in place/worn
Too much food in the Showcase is
preventing cold air circulating
Condenser needs to be cleaned
Showcase is not level
Showcase is too close to a wall or
other object
• Restricted Airflow
• Blocked Condenser
Temperature
Power Current
Range
190W 1.4A 0°C ~ 12°C
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Ventilate room or area around Showcase
Increase air flow around Showcase
Replace door seals
Take out some food
Clean Condenser
Adjust position to level
Move position
• Increase airflow
• Call POLAR agent or qualified
Technician
Dimensions
Refrigerant
H x W x D mm
R600a 292 x 1529 x 420
UK
Weight
39.7kg
5
2019/7/30 11:29