Tabla de contenido
Publicidad
AC to DC
Inverter to Bypass
DC Start
Self Diagnostics
Front Panel
LED
Key
Protection
Overload
Short Circuit
Battery
EPO
Normal Mode
Over
Temperature
Battery Mode
Audible Alarm
Battery Mode
Low Battery
Overload
Fault
Physical
Dimensions(HxWxD in mm)
Weights
Input Connection
Output Connection
Environmental
Operation Temperature
Noise Level
Relative Humidity
Interface
Interface Type
SNMP(option)
Compatible platforms
Standards and Certification
Safety
Performance
EMC
Markings
2.5ms(Typical)
By button of the panel or Software Control
Load Level/Battery Level/ Battery Mode/ Normal Mode/Bypass
Mode/ Self-Test/ Weak/Bad Battery/Site Wiring Fault/ Fault/
Overload/Programmable Outlet 1//Programmable Outlet 2
ON Button/ OFF Button/ (Test/Alarm Reset Button)
(AC or BATTERY Mode )
＜105％ continuous
＞106％～120％ for 30 seconds transfer to bypass
＞121％～150％ for 10 seconds transfer to bypass
＞150％
Buzzer continuously alarms.
Bypass mode : Input Fuse/Input Breaker
Normal Mode: Output Breaker/Electronic Circuit
Battery Mode: Output Breaker/Electronic Circuit
UPS shuts down immediately
Transfer to Bypass Mode
UPS shuts down immediately
Sounding once every 1.5 seconds
Sounding once every 0.2 seconds
Sounding once every 3 second
Continuously Sounding（or Sounding once every 3 second）
88(2U)x440x405
88(2U)x440x 650
15.7kg
10A, IEC 320-C14
10A, IEC 320-C14
(6) 10A,IEC 320-C13
0 to 90% (Without condensation)
1 *USB port+ 1*RS-232 port
Power management from SNMP manager and Web browser
Windows 95/98/NT/2000/XP Novell NetWare, Linux, etc.
IEC/EN 62040-1-1,IEC 60950-1
IEC/EN62040-2 Class A, FCC Part 15 Subpart B Class A,
Zero
Zero
Yes
for immediately transfer to bypass
ABDM
88(2U)x440x 650
29.4kg
16A, IEC 320-C20
(4) 10A,IEC 320-C13
(1) 16A,IEC 320-C19
0-40
＜50dBA
IEC/EN 62040-3
CE
29.7kg
Publicidad
Tabla de contenido
