Deleting Of Single Program - CTX BIOCLEAN CONTROL Serie Manual De Instrucciones

j) Set the day (daily) pressing "1...7" button. It
appears an arrow under the day of the week, move it
until appears an arrow on each day.
k) Set hour (19) pressing "h" button. Press it until reaching
the desired value.
l) Set minutes (53), pressing "m" button. Press it
until reaching the desired value.
m) Pass to program n°16 pressing "P" button.
Previous operation will be saved.
n) Set the day (daily) pressing "1...7" button. It
appears an arrow under the day of the week, move it
until appears an arrow on each day.
o) Set hour (23) pressing "h" button. Press it until reaching
the desired value.
p) Set minutes (54) pressing "m" button. Press it
until reaching the desired value.
q) Pressing "P" button, you can see all saved programs

4.4 - DELETING OF SINGLE PROGRAM

For each single program: 1st always delete the
start and then the end. As example program n°3. Move
switch in "P" position (programming)
a) Select program n°3 (start) by "P" button
b) Press at the same time
"skip" button.
Repeat this procedure for program n°4 (end)
button and
• 23 •