4.- MOUNTING THE RADIATOR USING THE FLOOR SUPPORT KIT (EMI FEET KIT)
If you are unsure whether your wall can bear the weight of the heater (if you have
plasterboard walls, for example), we advise you to buy the floor support kit (EMI FEET
KIT). This Kit includes two feet, which act as floor supports for the heater.
Please contact your local S&P distributor or visit our website: www.solerpalau.com
The assembly instructions for the EMI FEET KIT come with kit.
5.-
SET UP AND OPERATION
The ON/OFF switch is on the back of the control panel, and it is the master
switch to turn the appliance on and off. You will also see that the front of the
control panel has a screen and keypad (with four buttons) to use and program
the radiator.
Once the radiator has been assembled and connected to the power supply, press
the ON/OFF switch located on the back of the control panel. Then, press the
control panel
Your heater has several different settings, which are described briefly below:
and the screen will flash until you press any of the buttons.
18