Publicidad
Idiomas disponibles
Idiomas disponibles
KPS-DT20 • Voltage tester
Never connect the voltage tester to voltage for more
than 40 seconds.
ds (A)
Immediately prior to check the correct working order of
the voltage tester.
order
Check all of the functions on known power supplies. For
not be
example, to test DC voltage a car battery may be used.
7105).
A 220 V inlet can be used to test AC voltage.
minal
Do not use the voltage tester until all of its functions are
working correctly.
han-
4. Testing AC voltages.
more
The voltage tester can only be used within the nominal
d al-
voltage scale from 6 to 380 V.
Never connect the voltage tester to voltage for more
n the
than forty seconds (Maximum connection period al-
lowed = 40 seconds).
Connect the electrodes (1) on the test handles (A) and
clean.
(B) to the installation to be tested.
In the case of DC voltage above 6 V, the LED's (6) or (3)
will light up to a greater or lesser extent. The LED's light
econd
up progressively according to the voltage being tested.
ment
5. Testing DC voltage.
The voltage tester can only be used within the nominal
voltage scale of 6 to 380 V.
cord-
Never connect the voltage tester to voltage for more
C and
than forty seconds (Maximum connection period al-
so be
lowed = 40 seconds).
Connect the electrodes (1) on the test handles (A) and
) and
(B) to the installation to be tested.
with a
In the case of AC voltage above 6 V, the LED's (6) and (3)
will light up to a greater or lesser extent. The LED's light up
progressively according to the voltage being tested.
5.1. Testing polarity on DC voltage.
's (4),
The voltage tester can only be used within the nominal
n. The
voltage scale from 6 to 380 V.
Never connect the voltage tester to voltage for more
than forty seconds (maximum connection period al-
lowed = 40 s.).
minal
Connect the electrodes (1) on test handles (A) and (B)
to the installation to be tested.
7
Publicidad
