Hdmi Video Output; Video Connection - Composite - Raymarine Lighthouse eS Serie Manual Del Usario

4.17 HDMI video output

If your MFD has a HDMI output connection the
MFD's screen can be output to an external display.
Refer to the Connection Overview section to
establish if your MFD has a HDMI output.
1. MFD
2. External display (See note below)
3. Raymarine 5 m (16.4 ft) HDMI video output cable
(A80219)
Note:
1. The external display you are connecting to
must support the 720p standard to enable you
to view the multifunction display screen on the
external display. The multifunction display's
video output resolution is fixed at 720p.
2. The HDMI cable must only be connected to an
external display that is electrically isolated from
the vessel's dc power supply (i.e the screen
and the 0V of the external display's HDMI
connector must not have a direct connection
to the vessel's dc power supply).
For further assistance please contact Raymarine
technical support.
Cables and connections
1
4.18 Video connection — composite
Analog cameras can be connected directly to MFDs
that have a composite video input connection.
Refer to the Connection Overview section to
establish if your MFD has a composite video input.
MFDs that do not have a composite video input
connection can only be connected to IP cameras.
D12916-2
1. MFD
2. Connection to MFD (Power/NMEA/Video cable)
3. BNC video connector
4. Camera (video source)
Examples of other video sources that you can
connect to the video in put connection:
• Thermal camera
• DVD player
• Portable media player
Note: To listen to audio, any connected player will
require external speakers to be connected to the
player's audio output.
Video specification
Signal type
Format
Connector type
Output resolution
1
D12178-3
Composite
PAL or NTSC
BNC (female)
720p
49