Programming The Holiday Function For The Complete System - Vaillant geoTHERM VWS 220/2 Instrucciones De Operación

4 Operation
4.12 Programming the holiday function
for the complete system
Holiday programming
for cpl. system
Periods
1 >03.01.10
2 09.01.10
Room temp. setpoint
>Set starting day
34
6
05.01.10
24.01.10
15 °C
Prolonged periods of absence can be set in the Holiday
programming menu. It is possible to program two holiday
periods by specifying the dates for the controller and all
system components connected to it. In addition, you can
also set the desired room temp. setpoint for the holidays
here, i. e. independently of the normal time programme.
After the holiday time has elapsed, the controller automati-
cally reverts to the previous operation mode. The holiday
programme can only be activated in "Auto" and "Eco"
mode.
i
The room temp. setpoint during this period
should be selected to be as low as possible. Dur-
ing the holiday time programme, DHW loading
and the circulation pump switch automatically to
the "Off" operation mode.
Factory setting: Period 1:
01.01.2010 – 01.01.2010
Period 2:
01.01.2010 – 01.01.2010
Room temp. setpoint 15 °C
Operating instructions geoTHERM 0020051578_03