Atlantis A02-PlusCam Manual Del Usario página 21

To mount the +CAMHDMotor to the wall, place the camera in a position to ensure
the most comprehensive view for video monitoring. Unscrew the base of the camera
and remove the plate. The dots on the base of the camera indicate the location of
the expansion bolts. Insert the expansion bolts into the drilled holes. Use a
screwdriver to tighten or loosen the screws and secure the +CAMHDMotor. Connect
the device cables.
iSecurity+ (iOS or Android)
 Download (from AppStore or PlayStore) and Install iSecurity+.
 [+Cam/+CamHD] Please make sure the Wi-Fi Setup switch on the back of the
camera is set to ON [
then plug your power cord into the electrical outlet.
 [+CamHDMotor] Connect the +CamHDMotor to the AC power adapter, then
plug your power cord into the electrical outlet. Press the button 2seconds.
 Go to Settings -> Wi-Fi on your iPhone/SmartPhone
+CamHD wireless network (SSID is +CAM, +CamHD or +CamHDMotor).
]. Connect the +Cam to the AC power adapter,
ENG
and connect to the