Mode Button; Sensitivity Buttons - OWIM HG02408 Instrucciones De Montaje

Hold the remote control
Mode buttons
11

Mode button

SOS button
12
Continuous light button
FLASH button
14
Space button
15
Photo cell button
Night Button
16
Day button
18
The product confirms the received signal from the remote control
by a short flashing of the LED spotlight
and the product is switched on.
To switch off the product, press the OFF button
up shortly and then switches off.

Sensitivity buttons

Use the Sensitivity buttons
sensor . The detection angle expands or decreases automatically
1
with the selected sensitivity.
in front of the product and press one of the
8
with the desired function.
Function
The light flashes SOS
(3 x short, 3 x long, 3 x short).
The light is permanently on.
19
The light flashes.
This button has no function.
The light starts to light permanently at
17
darkness.
The light signals movements only in the dark.
The light signals movements both in
daylight as well as in the dark.
to adjust the sensitivity of the motion
9
. The function is now set
2
. The product lights
13
8
GB/IE 31