Important Safety Instructions; General Instructions; Personal Protective Equipment - Makita BBC231U Manual De Instrucciones

and returned to an environmentally
compatible recycling facility.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.

General instructions

1. Do not allow persons unfamiliar with the brushcutter/
string trimmer or these instructions to operate the tool.
Brushcutter and String trimmers are dangerous in the
hands of untrained users.
2. Be sure that anyone who is to operate the brushcutter/
string trimmer has first read the instruction manual.
3. Never allow people unfamiliar with these instructions,
people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge to use the tool. Local regulations can
restrict the age of the operator.
4. Use the tool with the utmost care and attention.
5. Operate the tool only if you are in good physical
condition. Perform all work calmly and carefully. Use
common sense and keep in mind that the operator or
user is responsible for accidents or hazards occurring
to other people or their property.
6. Never operate the tool when tired, feeling ill or under
the influence of alcohol or drugs.
7. The tool should be switched off immediately if it shows
any signs of abnormal operation.
8. Disconnect the battery from the tool before making
any adjustments, changing accessories or storing.
Such preventive safety measures reduce the risk of
starting the tool accidentally.
9. Don't force the tool. it will do the job better and with
less likelihood of a risk of injury at the rate for which it
was designed.
10. Don't overreach. Keep proper footing and balance at
all times.
Intended use of the tool
1. Use right tool. The cordless brushcutter/string trimmer
is only intended for cutting grass, weeds, bushes and
undergrowth. It should not be used for any other
purpose such as edging or hedge cutting as this may
cause injury.

Personal protective equipment

1. Dress Properly. The clothing worn should be
functional and appropriate, i.e. it should be tight-fitting
but not cause hindrance. Do not wear either jewelry or
clothing which could become entangled with bushes
or shrubs. Wear protective hair covering to contain
long hair.
2. In order to avoid either head, eye, hand or foot injuries
as well as to protect your hearing the following
8
protective equipment and protective clothing must be
used during operation of the equipment. (Fig. 1)
3. Always wear a helmet where there is a risk of falling
objects. The protective helmet is to be checked at
regular intervals for damage and is to be replaced at
GEB068-2
least every five years. Use only approved protective
helmets.
4. The visor of the helmet (or alternatively goggles)
protects the face from flying debris and stones. During
operation of the tool always wear goggles, or a visor to
prevent eye injuries.
5. Wear adequate noise protection equipment to avoid
hearing impairment (ear muffs , ear plugs etc.).
(Fig. 2)
6. Work overalls protect against flying stones and debris.
It is strongly recommended that the user wears work
overalls.
7. Special gloves made of thick leather are part of the
prescribed equipment and must always be worn
during operation of the tool.
8. When using the tool, always wear sturdy shoes with a
nonslip sole. This protects against injuries and
ensures a good footing.
Electrical and battery safety
1. Avoid dangerous environment. Don't use the tool in
damp or wet locations or expose it to rain. Water
entering the tool will increase the risk of electric shock.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
4. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
5. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
6. Do not dispose of the battery(ies) in a fire. The cell
may explode. Check with local codes for possible
special disposal instructions.
7. Do not open or mutilate the battery(ies). Released
electrolyte is corrosive and may cause damage to the
eyes or skin. It may be toxic if swallowed.
Starting up the tool (Fig. 3)
1. Make sure that there are no children or other people
within a working range of 15 meters (50 ft), also pay
attention to any animals in the working vicinity.
Otherwise stop using the tool.
2. Before use always check that the tool is safe for
operation. Check the security of the cutting tool and
the guard and the switch trigger/lever for easy and
proper action. Check for clean and dry handles and
test the on/off function of the switch.
3. Check damaged parts before further use of the tool. A
guard or other part that is damaged should be