Troubleshooting - benza BLS-5TB Instrucciones De Uso

ENGLISH
TROUBLE SHOOTING
PROBLEM
Fails to split logs
The log pusher
moves jerkily
making unfamiliar
noise or vibrating
Oil leaks around
cylinder ram or
from other points
PROBABLE CAUSE
Log is improperly positioned
The sizes or hardness of the log
Wedge cutting edge is blunt
Oil leaks
Unauthorized adjustment
made on
Screw
Lack of hydraulic oil and
excessive air in the hydraulic
system
Air sealed in hydraulic system
while operating
Bleed Screw Is not tightened
before moving the log splitter
Oil Drain Bolt with Dipstick is
not tight
Hydraulic Control Valve
Assembly and/ or seal(s) worn
REMEDY SUGGESTED
Refer to "Log Splitter Operation" sectlon
for perfect logloading
Reduce the log sizes before splitting it on
Refer to
to sharpen the cutting edge
Locate leak(s) and contact the dealer
Contact the dealer
Check oil level for possible oil refilling
Contact the dealer
Loosen Bleed Screw by 3~ 4 rotations
before operating the log splitter
Tighten the Bleed Screw up before
moving the log splitter
Tighten the Oil Drain Bolt with Dipstick
Contact the dealer
10