Care And Maintenance - KIKKA BOO UGO Instrucciones De Uso

7. Seat dual-directional regulation: Lift your nger to the side of the side and press on both sides. Push the button and pull the seat back to
the rear. Re insert the seat for the rear seat slot.
8. Bidirectional regulation of automobile seat: Put your nger in the car seat and press two side release button, the seat will be pullet out
after the change. Re insert the seat for the rear seat slot.
9. Carsear backrest adjustment: Seat seat, lying, lying three adjustment festival. Pull the back of the hand and the back. Up and down
regulation, the maximum adjustment angle is 155 degrees, the minimum adjustment angle of 95 degrees.
10. Seat footrest adjustment: Hands hold the foot pedal adjustment button, at foot can be lengthened baby sitting. Adjust the foot pedal to
the use of the state.
11. Hand adjustment: Hands hold grip adjustment button, can handle adjustment, suitable for di erent body the implementation of an expert.
12. Front-wheel alignment: First, the front wheel alignment direction, the to the parts of the position, push down can be. The directional pieces
up, the front wheel is can be rotated 360 degrees.
13. How to use the brake: Parking the car and the infant into the Or hold away from the front of the car, must be stepped on the brakes. Step on
the brake connecting rod is for the brake status. Lift the brake connecting rod.
14. Scope of application of brake: In order to ensure the safety of infants and young children, the car equipped with a ve point safety belt.
Insert the left and right plug in the center. Buckle slot, clear "click to hear" sound. According to the size of the infant body size adjustment The
shoulder, waist and crotch belt. Press and hold a key release button to solve open the safety belt. 1 and 2: Shoulder and back adjusting button.
3 and 4: Waist adjustment button. 5: Crotch buckle
FOLD AND UNFOLD:
15. In the installation of lying, car seat or seat facing the state, can not complete the folding car.
16. According the front seat, the car seat of the dis ssembly method, rst remove the seat, seat or car on the lift. Frame folding handle key will
handle downward pressure, folding.

CARE AND MAINTENANCE

1. Before use,check if the various components(serew rivet)is rm and good condition,if parts or seat cloth is damaged.please check the
maintenance regularly,if it is abnormal,please stop using it for your baby's safety.
2. Avoid to use for long time in wet,cold or high temperature environment, otherwise easily lead to rust,aging and so on and a ect the product
service life or occur the risk.
3. Clean cushion:relieve the xed ribbon and snap button,Dry after washing by hands with warm water.Don't over exposure.
4. Do not use bleaching agent when cleaning the stroller frame.please avoid metal parts to contact with water in order to avoid rust and to
a ect product service life
5. Check the stroller regularly.If there is a problem,please repair in time.
6. Please avoid excessive exposure or heat,otherwise it will cause parts aging and cloth fade.
7. All rotating parts(such as wheels,joints etc.)can not be added viscous mechanical lubricant,but a little diluted lubricant to avoid to in uence
rotation due to the lubricant with debris.
ENGLISH