Control Panel - dirna Bergstrom bycool SPLIT OFF ROAD Manual Del Usuario

SPLIT

Control Panel

1.- On/off: Switching the unit On - Off and mode selection F4/ F0/ F1/ F2/ F6
2.- Temperature selector (15/ 27 ºC - 59/80º F) Remote control programmation,
Farenheit degrees and Air Speed: Ambient temperature control and blower speed
(between 1st and 5th speed) manual mode only.
3.- Display: Screen showing the function selected and the status of the equipment.
4.- Led: On - indicates compressor operation.
• On connection, the equipment checks the leds and
and turns off.
Special display messages
Lb: Low battery (will beep for a few moments and the unit will go off).
EO: Poor contact of the return air sensor cables, or return air sensor faulty.
E6: Poor anti-freeze sensor cable contact, or anti-freeze sensor faulty.
Turning the equipment On
To turn the Split unit on, press the On/Off key
F4 Function (Automatic Function).
To change the function, hold down the On/Off key
displayed, release the key on obtaining the desired function.
2
ºC
CONDITIONING
3
ºF
TEMP
4
(please see failure Diagnosis)
9
Air conditioning for vehicles
1
:--;
BB
appears on the screen
:
. The unit will always start up on the
. The different functions will be
EN