Atlantis 7000 Serie Guia De Inicio Rapido página 23

FAQ
Questions
Can I buy
different +Cam
and associate
them to the
same user?
Can I change
Username?
System LED
+CamHD.
System LED
+CamHDMotor.
How can I reset
the +CamHD?
How can I reset
the
+CamHDMotor?
Sure, you can assign to a single account how many cameras you
want, without any limitations. The models available are:
• +CamHD7000 (high resolution, 2-way audio, Wireless)
• +CamHDMotor7000 (high resolution, 2-way audio, motorized,
Wireless LAN +)
• +CamHDOutdoor7000 (high resolution 1.3MP, ing Mic,
outdoor, wireless LAN +)
 +CamHDOutdoor7000 (high resolution 2MP, ing Mic,
outdoor, wireless LAN +)
Unfortunately, you cannot change the username defined during
account creation. You can reconfigure +CamHD combining it to a
new account. All services running on the old account will not be
transferred to the new one.
On the back panel of +CamHD there are 2 LED. This is the
meaning:
 Power [ ]: Fixed green when +CamHD is conneccted to the
main and is configured. Flashing when is waiting configuration.
 Wi-Fi[ ]:Fixed green when connected to an access point that
provides access to the Internet. Flashing when is waiting
configuration.
 LED: Flashing green when is not connected to the Internet
(with ethernet
configuration(WIFI).
Fixed green when it is connected to the Internet by LAN cable
or WIFI.
 Press, using a paper clip, for 10 seconds the appropriate button
to reset the device to its initial configurations. The speaker will
reproduce the message Start Voice Configuration and then
the message Reset Device. The device will restart and after a
few seconds, it will reproduce the voice message Waiting for
Configuration.
 Connect the network cable to the +CamHDMotor and press,
using a paper clip, for 10 seconds the appropriate button to
reset the device to its initial configurations. The speaker will
reproduce the message Reset Device.
Answer
cable) or when
ENG
it is waiting for