Stryker Stair-PRO 6250 Manual De Uso página 18

English
USING RESTRAINT STRAPS - CONTINUED
To attach the chest straps in the cross-chest configuration:
1. Wrap each strap around the chair frame, insert the end through
the loop on the end of the strap and pull it tight.
2. Pull the strap across the patient's chest, lengthening the strap
as necessary.
3. Buckle the strap.
4. Pull the loose end of the strap to tighten it securely around
the patient.
5. Repeat for the second strap and the lap belt.
Figure 5 - Insert the end through
Figure 6 - Pull the strap tight
Return To Table of Contents
1-16
Operation Guide
the loop
6250-001-161 REV D
Figure 7 - Lengthen strap as
necessary
Figure 8 - Buckle strap
Figure 9 - Tighten strap securely
www.stryker.com