Basic Oven Settings; Setting Options - Bosch HSLP451UC Manual De Uso Y Cuidado

Basic Oven Settings

User settings are available for the customer to customize
the appliance to their liking. Many of these features should
be adjusted when the oven is first installed or after a move
to a new location. User settings can only be accessed from
stand-by state. If the Settings button is pressed while the
appliance is not in stand-by, the display will sound an error
tone.
Adjust Settings
1. Select the SETTINGS button on the control panel.
2. Press the SOFT KEY 2 to advance through the menu
options. The following table lists the available setting
options and their values.
ITEM DESCRIPTION
°F/°C (Temperature Units)
Brightness
Volume
Clock
Stand-by Clock
Language
Weight Unit Type
Customer Service
Demo Mode
Steam Clean
Descale
Calibrate
Water Hardness
3. Press SOFT KEY 1 or the ENTER button on the control
panel to edit the setting that is in field.
4. Press SOFT KEY 3 in order to cycle through the
submenu options.
5. Set the option by pressing the ENTER key on the
control panel or by pressing SOFT KEY 1.
English 8
OPTIONS
°F
°C
Low
Med
High
Low
Med
High
Off
12 hr
24 hr
On
Off
English
French
lbs
Kg
Contact information only
On
Off
See page 27.
See page 28.
See page 7.
See page 7.

Setting Options

°F/°C (TEMPERATURE UNITS): The temperature units
setting allows the user to switch between fahrenheit and
celsius units of temperature. The default temperature unit
setting is "Fahrenheit".
BRIGHTNESS: The brightness setting allows the user to
adjust the brightness of the display. Switching between
values adjusts the backlighting of the display. The default
brightness setting is "High".
VOLUME: The volume setting allows the user to adjust the
sound level of button presses. The default volume setting is
"High".
CLOCK: The clock mode setting allows the user to select a
12 hour or 24 hour based clock. The default clock mode
setting is "12 hour".
STAND-BY CLOCK: The stand-by clock setting allows the
user to disable the clock whenever the user interface goes
into stand-by state. The default stand-by clock display
setting is "On".
LANGUAGE: The language setting allows the user to
select either English or French operating languages. The
default language setting is "English".
WEIGHT UNIT TYPE: The weight unit setting allows the
user to switch between pounds (lbs.) and kilograms (Kg)
units of measure. The default weight unit setting is "lbs".
CUSTOMER SERVICE: Contact information for the
Technical Service Department if your appliance needs
repair. Contains the following:
Visit us at: www.bosch-home.com/us
Or call 1-800-944-2904
DEMO MODE: Demo mode consists of 6 images cycled at
timed intervals. If any button is pressed, the user interface
appears to work as normal for the pressed button.
However, no real cooking mode information is passed to
the appliance. Therefore the oven will not heat up, preheat
will never end, self clean will not start, etc. After 30 seconds
with no input from the user, the display resumes the image
slide show.
STEAM CLEAN: You may use steam to dissolve food
residues and spills so that they can be easily wiped up.
Running the steam clean cycle takes 30 – 35 minutes. The
oven cannot be used for any other purpose while steam
cleaning is underway. Detailed instructions for steam
cleaning the oven are provided in the "Cleaning and
Maintenance" section of this manual starting on page 26.
The oven cannot be used for any other purpose while
steam cleaning is in progress.