Setting The Rear Camera Input; Setting The Aux Mode; Adjusting The External Input Audio Level; Setting The Picture/Sound Output - Alpine IVA-D106 Manual De Operación

Setting the Rear Camera Input

With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
Even if the shift lever is not set to reverse (R), the rear
ON:
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL "Setting the VISUAL Button"
(page 39).

Setting the AUX Mode

Setting item: AUX IN
Setting content: OFF / ON / CAMERA / DVD / GAME / TV /
EXT. DVD / NAV.
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the SOURCE selection screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected name is displayed on the VISUAL and REAR selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
• If an optional Back-up camera is used by connecting to the AUX/
CAMERA IN Connector (Yellow) of the unit, make the "CAMERA"
setting. (Refer to "Connecting Video compatible iPod and Back-up
Camera at the same time" on page 85.)
• When ON is set in "Setting the Rear Camera Input" (page 39) and
"VIDEO" is set in "Setting for iPod Connection" (page 38),
"CAMERA" is displayed.

Adjusting the External Input Audio Level

After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level

Setting the Picture/Sound Output

Outputs the picture/sound of the source selected on the IVA-D106
connected to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
ON: The "REAR" item is displayed on the SOURCE selection
screen.
Touch [REAR] to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
OFF: The "REAR" item is not displayed on the SOURCE select
screen.
Setting the Bluetooth Connection
(Bluetooth IN)
Setting item: BLUETOOTH IN
Setting contents: OFF / NAV. / ADAPTER
OFF: Select to ignore any external interrupts.
NAV.: select when an optional Portable Navigation is
connected.
Change voice line to RCA when TEL rings.
ADAPTER: Select when an optional Bluetooth box is
connected.
When external interruption occurs, the display
changes to the TEL screen.
A source name of TEL on the SOURCE selection
screen is displayed.
• For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.
• If a Bluetooth Box compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.

Setting the USB Adapter to ON/OFF

If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting content: OFF / ON
OFF: Does not display the USB source name on the SOURCE
select screen.
ON: Displays the USB source name on the SOURCE select
screen.
• If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.

Setting the VISUAL Button

Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
NAV.: Switches directly to the navigation screen by touching
[VISUAL] on the main source screen or pressing
VISUAL on the unit. (Only when an Alpine optional
RGB Navigation is connected.)
VISUAL: Recalls the VISUAL Selection screen by touching
[VISUAL] on the main source screen or pressing
VISUAL on the unit.

Setting the Digital Output

To connect an audio processor using the optical digital output, set to
"ON" by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.

Setting the AUX+ Level

The setting is made if AUX+ is selected in "Setting for iPod
Connection" (page 38).
Setting item: AUX+ LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
39
-EN