Cattani Turbo-Smart A Manual De Instrucciones página 33

User Parameters menu
To access this menu and/or make any changes, you are
required to enter the access password 0000123000 (see
instructions on page 30).
Vacuum Set Point
This is the figure to which the unit will limit the vacuum.
Press the I Enter Key to make the cursor appear. The figure
I
can be changed using the arrow keys . Press the
Enter Key again to confirm and continue.
Language
It is possible to choose either English (1) or Italian (0) for the
displayed language.
Press the I Enter Key to enable the cursor and use the
arrow keys to select 0 or 1.
Press the Enter Key again to confirm the change and continue.
I
Generated Code
This code is generated by Cattani S.p.A. Each unit is allocated
a unique code. This code needs to be supplied to Cattani to
purchase the password (Activation Code) to upgrade version
A (2 chair unit) to version B (4 chair unit).
Activation Code
Once purchased from Cattani S.p.A., this code is entered
at this point to upgrade version A (2 chair unit) to version B
(4 chair unit).
I
Press the Enter Key to make the cursor appear.
Use the keys to move the cursor. Enter the Activa-
tion Code using the keys to increase or decrease the
figure.
Press the I Enter Key again to confirm, then press to go
back to the User Parameters menu.
32
INDEX
HOME