Using Transmitter; Function Settings; Setting The Bank And Channel Numbers - Toa WM-D5300 Serie Manual De Instrucciones

7.2. Using transmitter

step 1. Plug the microphone's plug into the input
connector as illustrated.
step 2. Confirm that the wireless microphone and the
wireless receiver are identical in the bank and
channel number.
If not identical, turn the power switch to the
OFF position, then set the bank and channel
numbers to the same ones as the receiver.
step 3. Turn the Power switch to the ON position.
Then, confirm the battery checker will light
green or orange.
step 4. Turn the Power switch to the OFF position
after use.

8. FUnCtiOn settings

8.1. setting the Bank and Channel numbers

step 1. Turn off the power switch.
step 2. Detach the battery cover.
step 3. Using the supplied screwdriver, set the bank
selector switch's pointer to the desired number,
and set the channel selector switch's pointer
likewise.
step 4. Replace the battery cover.
Secure the connection with the plug lock.
Screwdriver
(accessory)
3
1
Plug lock
2
11