Preparing Batteries; Battery Insertion; Guide To Battery Operating Times - Toa WM-D5300 Serie Manual De Instrucciones

6. PreParing Batteries

The WM-D5300 can operate on both the optional rechargeable battery or replaceable dry batteries.
Please carefully read the corresponding sections for correct use.

6.1. Battery insertion

step 1. Turn off the power switch.
step 2. Hold the transmitter body and slide the battery cover to the right
to remove it.
step 3. Insert an AA battery according to (+) and (–) indications on the
battery compartment.
For the rechargeable battery, use the optional TOA WB-2000-2
(package of 2).
For dry batteries, use either the supplied battery or commercial
AA alkaline batteries (LR6).
step 4. Replace the battery cover.

6.2. guide to Battery Operating times

6.2.1. remaining operating time
The color of the battery checker changes from green to orange
as battery consumption progresses, and to red if the battery
is further continuously used. When the battery checker turns
red, charge the battery if the dedicated rechargeable battery
is used. In the case of dry batteries, replace it with a new one.
guide to the remaining operating time based on the battery
charge indicator status]
Battery checker status
Lights green
Lights orange
Lights red
6.2.2. Continuous operating time
Guide to continuous operating times: Approx. 8 hours (for fully-charged dedicated rechargeable
note
Operating times may vary depending on usage conditions, such as ambient temperature.
8
Remaining operating time
2 – 8 hours
Less than 2 hours
Battery requires charge or replacement.
battery or alkaline battery)
3
Green Orange Red
2