Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
F. Compresor
Use the compressor with external battery for inflating tires, balls, boats, pools ...
Follow these steps:
1. Connect the battery to the compressor via the adapter cable.
2. Pull down the cable from the top of the compressor.
3. Connect it to the adapter appropriated to the object that you want to inflate.
4. Connect to it and turn on the battery and the compressor to start inflation.
5. You can check the air pressure in the compressor indicator.
G. indicator Description:
Light press switch button, power indicator shows as following:
Battery
Not shine
indicator
Electricity
0%
When charging the product, battery indicator flashes by cycle, the number of the
lights represent the real electricity of the battery, if four lights lighting, it means
charging is paused or terminated.
H. switch:
When plug in the charging connector, start the switch, and only under the state of
indicator light lighting it can charge for electronic products.
i. Charge the NC1205 external battery:
1. Put the wall charger into the charging socket of the battery
2. Plug the wall charger into the DC input port of the product
Or:
1. Connect the car charger with car
2. Connect the other end of the car charger with product DC input port
Note: when charging the product, it does not support to charge mobile phones, tablet
computers and other devices at the same time.
One light
One light
flash
10%
25%
Two lights Three
lights
50%
75%
Four
lights
100%
Publicidad
Tabla de contenido
