Fermax Cityline DUOX PLUS Manual De Instalador página 17

Configuration - Programming the Amplifier
The DUOX PLUS amplifier can be configured to allow for the
operation as a general entrance, block entrance or sub-block
entrance.
• The DUOX PLUS system uses 6 digit house terminal addresses.
• These call code digits are organised as follows: BBSSNN:
- BB: indicates the Block number, (from 00 to 99).
- SS: indicates the sub-Block number, (from 00 to 99).
- NN: indicates the sub-Block house number, (from 00 to 99).
You do not have to segregate the installation according to this
hierarchy since the system adapts to the installation´s needs.
• The kit panels are a special case and only allow a range of 1 to 2.
IMPORTANT NOTE:
Configuration of the parameters by the installer.
- You can configure the BUTTONS via the voice assisted programming. See
instructions via the QR codes on the back of the amplifier or at www.fermax.com.
Pag 17