Connection To The Ip_Axes 1/2+ Unit - Fermax IP_AXES 4+ Manual De Instalador

Cod. 97846 V05_17

CONNECTION TO THE IP_AXES 1/2+ UNIT

You can also use the A and B terminals on the IP_AXES 4+ modules to connect an RS-485 bus.
Information:
CAT5 cable is recommended (1 pair for A,B and another pair for negative (GND)
CAT6 cable is recommended for industrial installations.
Max. distance: 750 m (depending on the cable and the power supply of the installation).
Warning: Do not install the cables near other high voltage or high current cables, particularly 230V
or higher. Use the same pair for the A and B lines.
3200291
IP_AXES
1/2+
A
B
A B
RS485
Page 15/29
IP_AXES 4+
A
B
Up to 10 modules per
IP_AXES 1/2+
RS485