Setting The Time; Weekly Programming - Carrera HJDXK10GT46S Manual De Instrucciones

Secondary programmes and functions

SETTING THE TIME

- Press MENU, then + to access the Hor menu.
- Press OK-boost to enter this menu.
- Press + or - to set the day of the week :
d1 = Monday, d2 = Tuesday,...., d7 = Sunday.
- Press OK-boost to validate
- Press + or - to set the hour.
- Press OK-boost to validate.
- Press + or - to set the minutes.
- Press OK-boost to validate.
- Press + or - to select automatic (Aut) or manual (ΠAn) time setting.
- Press OK-boost to validate.
- Press MENU to exit the menu
. If the icon permanently flashes in programme mode (Pro or EcP), this
indicates that the time is offset following a power cut. It is flashing as a time
has not been set.
. Following a power cut, the appliance will automatically restart with all of
the settings used before the cut (if it was on or off before the cut, it will stay
on or off after the cut).
. Automatic time setting is not possible outside France.
. Select manual time setting if daily automatic time setting is incorrect.

WEEKLY PROGRAMMING

. The time must be set before any programming.
. There are two programmers available. They comprise 6 programs: Pr1 to
Pr6 for one, and 3 programs, Ec1 to Ec3 for the other. Selecting Pro or EcP
mode activates one or the other.
. The time period for one programme may overlap the time period of anoth-
er. In this case, Boost is prioritised over Comfort mode.
12
Quick start