Trouble Shooting; Important - Carrera HJDXK10GT46S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 144

Trouble shooting

Problem
- The appliance does not
display anything.
- The device does not heat.
- The appliance stays in
heat mode..
- The buttons are not work-
ing.
- The appliance continues
to heat outside of the pro-
grammed time period.
- Boost does not work in
Programme mode.
- The
icon is constantly
flashing.
- The
icon flashes.
- ''Er'' flashes.
- The appliance gives off a
smell.
IMPORTANT : If the problem persists, disconnect the power supply for 15
seconds then check its operation.
- Check that a circuit breaker has not cut the
power to the appliance.
- Select Comfort mode.
- Increase the temperature setting.
- Switch off the appliance for a few minutes to
reset the thermal safety circuit breaker.
- Stop Boost.
- Reduce the temperature setting.
- Check that there are no air currents nearby.
- Unlock the keypad by pressing and holding for
3 seconds on the MENU button.
Outside of the time periods, the appliance does
not switch off but goes into Eco mode.
- Reduce the Eco temperature.
- Check that another time period is not activated.
If Boost was stopped manually during Pro-
gramme mode, it can only be reactivated auto-
matically after a period of 2 hours.
- Activate Boost manually.
The time is out of alignment.
- Set the time.
- This is normal during Boost.
- Faulty temperature sensor (this fault prevents
the appliance from switching on).
- When it is used for the first time or if it has re-
mained unused for a prolonged period of time,
the appliance can release an unpleasant smell,
which should disappear quickly.
19
Trouble shooting
Solutions

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hjdxk15gt46sHjdxk20gt46s

Tabla de contenido