Festool OFK 700 EQ Instrucciones De Servicio página 8

6 Electronics
The router features full-wave elec-tro-
nics with the following properties:
Smooth start-up
The smooth start-up ensures the router starts
up jolt-free.
Speed adjustment
You can regulate the speed steplessly between
10,000 and 26,000 rpm using the adjusting
wheel (2.2).
This enables you to optimise the cutting speed
to suit the material.
Constant speed
The pre-selected speed remains constant whe-
ther the machine is in operation or in neutral
position.
7 Working with the machine
Always secure the tool in such a way
that it cannot move during machining.
Ensure that the sensing roller and sen-
sing spring do not touch the cutting
tool.
Set the routing depth
see Fig. 7
Open the rotary knob.
Adjust the guide table (7.1) and sensing
roller (7.2) or sensing spring (7.3) to
the required routing depth.
Close the rotary knob.
Guide the machine along the workpiece at a
steady rate of advance.
Make sure that the guide table and the sensing
roller or sensing springs always rest on the
workpiece (see Fig. 8 + 9).
Use the sensing spring for straight and un-ma-
chined workpiece edges and the sensing roller
for curved workpiece edges.
8 Maintenance and care
Always remove the plug from the
mains supply socket before car-
rying out any work on the machi-
ne!
Always keep the machine and the ventilation
slots clean.
The machines are fi tted with special carbon
brushes with automatic-switch-off. When the
brushes reach their wear limit the current is
interrupted automatically and the router comes
to a standstill.
Any maintenance or repair work requiring the
motor housing to be opened may only be carried
out by an authorised service workshop.
9 Accessories, tools
The accessory and tool order number can be
found in your Festool catalogue or on the In-
ternet under "www.festool.com".
10 Warranty
Our equipment is under warranty for at least 12
months with regard to material or produc-tion
faults in accordance with national legislation.
In the EU countries, the warranty period is 24
months (an invoice or delivery note is required
as proof of purchase).
Damage resulting from, in particular, normal
wear and tear, overloading, improper handling,
or caused by the user or other damage caused
by not following the operating instructions, or
any fault acknowledged at the time of purchase,
is not covered by the warranty.
Complaints will only be acknowledged if the
equipment has not been dismantled before
being sent back to the suppliers or to an autho-
rised Festool customer support work-shop.
Store the operating instructions, safety notes,
spare parts list and proof of purchase in a safe
place.
In addition, the manufacturer's current warran-
ty conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as
a result of ongoing research and development
work.
8