Leica SF 64 Manual De Instrucciónes, Uso Y Manutención página 72

EN Setting synchronization/learning function
1. Set the
2. Press the sensor button
3. Use
4. Press desired function
72
mode on the camera
M-SLAVE
on the touch
SYNC ???
display repeatedly until the relevant selection list
appears
▲ / ▼ to move the desired synchronization (
without preflash, with preflash), or learning
???
function ( ) to the central field outlined in
LEARN
red
The selected setting is accepted immediately.
Learning function
The "learning function" enables the automatic
adjustment of the second flash unit to the flash
technique of the lead flash unit. It takes account of
whether it uses one or more preflashes, e.g. to
?
reduce the "red-eye effect". The second flash unit is
then triggered at the time of the main flash that lights
up the picture.
Setting procedure
1. Switch off AF preflash function on the camera
2. Press the sensor button
3. Press sensor button
4. Learning mode is ready to start.
5. Press the camera shutter release so that the
Note:
If the lead flash unit emits AF measuring flashes for
automatic focusing, no learning mode is possible for
systemic reasons.
If possible, use a different camera mode or switch to
manual focusing.
on the touch
SYNC ???
display repeatedly until the relevant selection list
appears
LEARN
main flash unit of the camera fires
• If the second flash unit receives a light pulse
and has adjusted itself to the flash technique
of the main flash unit,
LEARN OK
the display as confirmation.
appears in