INDIRECT FLASH WITH REFLECTOR CARD
Indirect fl ash with the integrated refl ector card
generate highlights in people's eyes.
Using refl ector card
Pulling out
1. Pivot refl ector head
up by 90°
6
2. Pull the refl ector card
together with the
6b
wide-angle diff user head
6c
out from the top of
the refl ector head at the front
Pushing in
Hold the refl ector card
and push wide-angle
6b
diff user head
back in the refl ector head
6c
can
6b
CLOSE-UPS/MACRO SHOTS
For close-ups and macro shots, there may be
shadows on the lower edge of the picture due to
parallax errors between the fl ash unit and the lens. To
harmonize this, the main refl ector can be pivoted
down by an angle of 9°.
Press the release button
of the refl ector head
6a
and pivot the refl ector down.
• When the main refl ector is pivoted down,
shown in the display to show this.
Notes:
• The second refl ector is not supported and does not
fl ash.
• When taking close-ups, note that certain minimum
illumination distances must be adhered to in order
to avoid overexposure.
EN
6
is
83