Virutex PAE85T Manual De Instrucciones página 47

Causes
1- Significant defects in the edge trimming.
2- Slight corrections in the trimming.
3- The edge has a series of differences along the entire tri-
mmed edge.
Solutions
1 - Check that the counter coincides with the position of Ta-
ble A for the edge thickness being trimmed and for the type
of finish you want to obtain. If this is not the case, correct
them as indicated in sections 5.6.1 and 5.6.2.
2 - You can improve the trimming obtained through making
small adjustments to the position of the stop or the copier.
3 – Clean the edge of the copier.
PAE85T / Operating instructions - 47