Operating Instructions; Switch On And Off; Distance Measurement Mode - Kapro KAPROMETER K7 Manual Del Usuario

Switch ON and OFF.

1. Press the
2. The device will process the start-up procedure and the laser
beam will turn ON and the device is ready for taking measurements.
3. To turn OFF the device press and hold the button
until the beep is heard.

Distance Measurement Mode.

1. Press the button
The laser beam will be activated
2. Aim to the target and press the button
3. A beep will be heard, and the measurement will
be shown at the bottom row of the LCD screen,
and the laser will turn OFF.
4. If the device will not receive the signal from the
target, the beep will be heard twice.
5. Press the button
6. Press again the button
12

OPERATING INSTRUCTIONS

to turn ON the device.
or
or
to turn ON the laser for next measurement.
to turn ON the device.
to take the next measurement.