General Safety Instructions - LaserLiner CenterScanner Plus Manual De Instrucciones

Completely read through the operating instructions, the "Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
Function/Application
The CenterScanner Plus is a system which consists of transmitter and receiver for reliably determining
the entry and exit points of holes in walls and ceilings up to a wall thickness of 150 cm. With clearly
visible LED indicators and acoustic signals, the device enables precise location of entry and exit positions
and additionally features easily accessible marking aids in the receiver and transmitter. The integrated
LC display shows the signal radius of up to 200 cm. The transmitter TX features integrated metal and
voltage detection to prevent misplaced holes.

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope of the
specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– Fixing with special adhesive or adhesive strips does not provide a 100% secure grip. Always keep the
danger area clear.
– Before taking any measurements, make sure that both the area to be tested (e.g. a line), the test
device and the accessories used (e.g. connection cable) are in proper working order. Test the device
by connecting it to known voltage sources (e.g. a 230 V socket in the case of AC testing).
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– Observe the safety precautions of local and national authorities relating to the correct use of the device
and any prescribed safety equipment (e.g. electrician's safety gloves).
– Do not work alone in the vicinity of hazardous electrical installations and only under the guidance of
a qualified electrician.
– The measuring device must not be used as a substitute for a two-pole zero potential test.
Additional information on use
Observe the technical safety regulations for working in the vicinity of electrical systems, especially:
1. Safely isolating from power supply, 2. Securing to prevent system being switched on again,
3. Checking zero potential, two-pole, 4. Earthing and short-circuiting, 5. Securing and covering
adjacent live components.
Safety instructions
Dealing with electromagnetic radiation
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity
of people with pacemakers – may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high voltages or high
electromagnetic alternating fields.
– Precautions: Do not use any other CenterScanner Plus within a distance of 10 m. Do not use
any electronic transmitters or electric motors in the vicinity.
08
EN