General Safety Instructions - LaserLiner VideoPocket Manual Del Usuario

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
the latest information under the internet link at th e end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed on
together with the device.
Function / Application
This compact video inspection system allows easy visual inspection
of hard-to-reach locations such as pipework, suspended ceilings
and vehicles. The compare image function allows the user to see
the differences between the live image and a saved reference
image. The images and videos can be saved to the internal photo
memory or a micro SD card.

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of
reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme tempera-
tures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions
fail or the battery charge is weak. ist.
– When using the device outdoors, make sure that the weather
conditions are appropriate and/or that suitable protection
measures are taken.
– The LCD unit must not be immersed in water. The base unit must
not come in contact with liquids.
– The camera head is not acid-resistant or fireproof.
– It is absolutely vital to ensure that the VideoPocket does not come
into contact with chemicals, voltage, moving or hot objects. This
can damage the device and put its user at risk of serious injury.
– The VideoPocket must not be used for medical examinations /
examining people.
– Please ensure compliance with the safety regulations set out
by local and national authorities with regard to the correct and
proper use of the device.
– The unit is not suitable for taking measurements close to
dangerous voltages. Therefore always make sure that conductive
parts are at zero potential when carrying out measurements in
the vicinity of electrical systems. Safe isolation from the power
supply and precautions to prevent systems being switched on
again must be ensured by implementing suitable measures.
VideoPocket
09
EN