General Safety Instructions - LaserLiner SensoPilot Pro Manual De Instrucciones

Ocultar thumbs Ver también para SensoPilot Pro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
SensoPilot Pro
Laser receiver for steering construction machines. In combination with a rotation laser, the SensoPilot is
used for continuous level/height monitoring. Through four 25 cm laser receiver units, the laser beam can
be received in a radius of 360°. The laser level is indicated by large, very easily visible LEDs. Range: 200 m.
Highly robust waterproof and dustproof housing with powerful magnets for fixing to the machine.
Remote display for SensoPilot Pro
The remote display allows the reference height to be viewed direct from the driver's cab of the construc-
tion machine. It therefore ideally supplements the SensoPilot laser receiver. Highly robust design with
mounting base and waterproof and dustproof housing.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope of
the specifi cations.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modifi ed in any way.
– Avoid strong vibrations and extreme temperature fl uctuations.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– Use the power supply/charger unit only in closed rooms; do not expose to moisture or rain otherwise
risk of electric shock.
– Charge the device's battery completely prior to use.
– Please only use the power pack/charger supplied. Using any other power pack/charger will invalidate
the warranty.
– Charging is completed after 15 hours.
– The battery can also be charged while using the device.
– Disconnect the power pack from the power supply when the device is not in use.
– To avoid the risk of fi re, electric shock or personal injury never use extension cables as well as accessories
not approved by the manufacturer in connection with the battery charger.
SensoPilot Pro
07
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido