LaserLiner SmartLine-Laser 360 Manual De Instrucciones página 8

1
3
4
11
13
2 Horizontal and vertical levelling
Release the transport restraint, set
the ON/OFF switch to „ON". The
laser cross will appear. The laser lines
can be switched individually with the
selection button.
The transport restraint must be released for horizontal and vertical levelling. The laser lines flash and the
!
LED lights red as soon as the device is outside the automatic levelling range of 5°. Position the device
such that it is within the levelling range. The LED switches back to green and the laser lines stop flashing
(steady light).
08
GB
5
6
2
7
Park
Always rotate the special pins
12
into their parked position for
!
transport, see illustration
below. Otherwise there is
danger of injury.
LASER
1 Laser output windows
2 ON / OFF switch;
transport retainer
3 1/4" fastening screw
8
4 5/8" tripod threads with
threaded bush insert for
1/4" photo-tripod threads
9
5 Special pins for direct
attachment to a wall
6 LED levelling
red: levelling off
10
green: levelling on
7 Laser line selection button;
Hand receiver mode on / off
8 LED hand receiver mode
9 Battery compartment (backside)
10 5/8" tripod threads (bottom)
11 Holding magnets on the
back-side for attachment to
Fasten
magnetic-responsive objects
12 Height adjustment knob
13 Tripod/wall bracket with
63 mm height adjustment
LASER LASER LASER