LaserLiner MultiMeter-Home Manual De Instrucciones página 18

black
Resistances can only be measured correctly in isolation;
therefore, the components might need to be disconnected
from the remainder of the circuit.
!
When measuring resistance, to avoid the risk of the results
of a measurement being distorted, there must be no traces of
dirt, oil, solder spray or other contamination on the test prods.
Technical data
Function
Max. input voltage
DC voltage
AC voltage
DC current
Batteries
Resistance
Input sensitivity
18
EN
red
Range
300 V AC / DC
12 V
60 V
120 V
300 V
60 V
120 V
300 V
30 mA
600 mA
1.5 V round cells / AA, AAA, C, D
9.0 V flat cells / E-block
X10Ω
X1kΩ
Test voltage max. 3.2 V
2kΩ * final voltage value/V
(e.g. 2kΩ * 300V/V = 600kΩ)
Accuracy
± 5% / final value
± 5% / final value
± 5% / final value
± 5% / final value