LaserLiner ActiveTester Manual De Instrucciones página 11

3 Calibration
The voltage tester needs to be calibrated and tested on a regular
basis to ensure it produces accurate measurement results.
We recommend carrying out calibration once a year.
Technical data
Voltage range
Frequency range
LED display
Tolerance
Response time
Overvoltage
Pollution degree
Degree of protection
Power consumption
Operating conditions
Storage conditions
Weight
Subject to technical alterations. 18W21
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=actes
12, 24, 36, 50, 120, 230, 400 VAC
+/- 12, 24, 36, 50, 120, 230, 400 VDC
50/60 Hz
12, 24, 36, 50, 120, 230, 400 V
Positive/negative polarity
-30% to 0% of the reading
< 0.1 s, LED
CAT III - 400 V
2
IP64
Is < 0.2 A / Is (5s) < 3.5 mA
(cycle: 5% switch-on duration / 10 min.)
-10°C ... 55°C, Max. humidity 80%rH,
no condensation, Max. working
altitude 2000 m above sea level
-10°C ... 70°C, Max. humidity 80%rH
115 g
ActiveTester
11
EN