Display And Buttons; Display; Buttons - Carrier RG56N Serie Manual Del Propietário

DISPLAY AND BUTTONS

2.1 DISPLAY

SET TEMP.
03
Mode display
Displays the selected mode.
AUTO, COOL, DRY, HEAT
Transmission Indicator
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Temp./Timer display
The temperature setting (from 17 C to 30 C) or timer
setting (0~24h) will be displayed.
If FAN mode is selected, there will be no Temp. display.
ON/OFF display
This indicator will be displayed when the unit is
operating
Mode display (Fan mode)
Fan speed display
Displays the selected fan speed: AUTO, HIGH,
MED and LOW. Nothing displays when the fan
speed is selected in AUTO speed. When AUTO
or DRY Mode is selected, there will be no signal
displayed.
FOLLOW ME display
When pressing FOLLOW ME button in COOL or
HEAT operating mode, the remote sensing function is
activated and this indicator displays.
TIMER display
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it's
display TIMER ON. If only the Auto-off time function
is set, it's display TIMER OFF. If both functions are
set, it's display TIMER ON OFF.
LOCK display
Lock display is displayed during LOCK mode.

2.2 BUTTONS

On/Off
AUTO
Press to start operation.
COOL
Press again to stop.
DRY
HEAT
Mode
Press the mode button to switch
the mode in turn.
Sleep(X-ECO)
Mode
Press to enter Sleep Mode
(RG56N series) or X-ECO
mode (RG56V series).
Direct
My Mode Follow Me LED
Press to set the louver position.
Fresh Self Clean
Swing
Press to swing the louver.
My Mode
Press to memorize or resume
your favorite pre-settings.
Follow Me/Fresh
Press to activate or clear the Follow
me function. (Model dependent)
NOTE:
1. Above illustration shows all the features. For actual model, only the relevant parts are shown.
2. Buttons design might be slightly different from the actual one.
Temperature Down
FAN Decreases temperature in
SET TEMP.
HIGH
1 C increments.
MED
Min Temp. is 17 C
LOW
Temperature UP
Increases temperature in
1 C increments.
Max T emp. is 30 C .
On/Off Fan
Fan Speed
Press to select the fan speed.
Sleep
(X-ECO)
TIMER ON
Turbo
Press to set the timer to turn
unit on.
Silence
TIMER OFF
Press to set the timer to turn
unit off.
Turbo/Silence
Press to activate the Turbo or
Silence function. (Model
dependent)
LED/Self Clean
Press to turn on/off the LED
display or activate the Self
Clean function. (Model
dependent)
04